Ride with peace of mind
A patented magnetic mount that combines simplicity, security, and performance.
-
Easy to use
Quick setup. Snap in 1 second. One hand is all it takes.
-
up to 225 km/h
Extreme stability, tested at high speed. Zero drop-offs.
-
Zero vibrations
The sleeve absorbs vibrations and protects the optical sensor.
-
all rides
Sleeve for rain, plate for sun.
-
Rain-resistant
Protects against showers and drizzle. Keeps your phone dry.
-
All handlebars and stem clamps
From 22 to 32 mm in diameter
They trust us:
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
When your phone is mounted on your motorcycle or scooter, it can be subject to certain high-frequency vibrations emitted by your vehicle's engine. These vibrations can damage the camera (the optical image stabilizer) of your phone.
Our sleeve absorbs up to 50% of engine and road vibrations.
To eliminate up to 90% of vibrations, we recommend using the Shapeheart anti-vibration mount. The anti-vibration mount is also recommended for using the metal plate in all circumstances.
ALL HANDLEBARS
Turnkey installation
ALL HANDLEBARS
Turnkey installation
1. Choose the adapter according to your handlebar diameter:
- 31.8 mm diameter handlebar: no adapter needed.
- 28.6 mm diameter handlebar: 1.7 mm adapter.
- 25.4 mm diameter handlebar: 3.5 mm adapter.
- 22.2 mm diameter handlebar: 5.1 mm adapter.
2. Position the adapter on the handlebar, then screw the mount on top of it using the Allen key.
3. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly), and you're off!
Do you still have questions?
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Bear in mind that brands like Apple now even put magnets inside the phone.
I've heard that mounts can damage the phone's camera?
True, for motorcycles only — the engine vibrations of certain motorcycles can damage the optical image stabilizer of some phones (mainly iPhone).
Our mounts with sleeves absorb vibrations, so there is no risk.
We explain everything here.
Can my phone be stolen?
The question is legitimate, but it is absolutely not an issue we encounter.
For one thing, the mount is removable. Our mounts are very discreet, with no obvious distinguishing features. There is no more risk than when walking down the street with your phone in hand.
Snatch thefts happen, most of the time, on public transport. On the subway, for example, where once the doors close, there is nothing you can do.
Again, the question is legitimate, but we have not had a single report of this type of theft.
If your concern remains, you can install the Shapeheart Phone Strap.
Is the sleeve fully touchscreen-responsive?
Yes, of course. And to ensure the touchscreen is as responsive as possible, it's important to choose the right sleeve size — refer to our size guide.
Does the sleeve really protect against rain?
The Classic and Pro sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, choose the waterproof sleeve.
But under normal conditions, you can ride in the rain without any issue with our 3 sleeves.
Does the phone get hot?
Obviously, inside the sleeve the phone will get warmer than without a sleeve. It then depends on the phone, the GPS usage, whether you are charging the phone at the same time, and the outside temperature.
It's rare but it can happen. In that case, it's better to go with the version using the metal plate.
Is there sun glare?
Yes, it can happen. Depending on the position of the sun, the angle of the phone, or your posture on your 2-wheeler. You can use the metal plate to reduce this effect, but keep in mind that even without a sleeve, in direct sunlight, visibility can be reduced.
Don't forget to turn your brightness up to the maximum either.
Can I charge my phone?
Yes, of course! The Classic and Pro sleeves have a slot for passing the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you don't need to buy anything. If not, you can just repurchase the sleeve — no need to buy everything again.
Is there a warranty?
Yes, up to 10 years when you register your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove the case to charge your phone on your MagSafe charger.
MagSafe alone will not be sufficient to withstand impacts. It is essential to use the Shapeheart sleeve or plate to ensure proper use of the mounts.
Which version should I choose?
Everything is explained: here.
Free delivery
from €49 and ships within 24 to 48 hours
Secure payments
Visa, Mastercard, Paypal, Apple Pay
Here for you 7 days a week
Customer service 7/7 days: contact@shapeheart.com
Product warranty
10 years when you register your product!
