Best seller-
-
-
-
-
-
-
-
Ride with peace of mind
A patented magnetic mount that combines simplicity, safety, and performance.
-
Easy to use
Quick installation. Snap in 1 second. One hand is all you need.
-
up to 225 km/h
Extreme stability, tested at high speed. Zero drop-offs.
-
Zero vibrations
The sleeve absorbs vibrations and protects the optical sensor.
-
all rides
Sleeve for the rain, plate for the sun.
-
Rain-resistant
Protects against showers and drizzle. Keeps the phone dry.
-
All handlebars and risers
From 22 to 32 mm in diameter
Professionals trust us:
Protects your phone
Absorbs vibrations
Protects your phone
Absorbs vibrations
By attaching your phone to your motorcycle or scooter, it may be exposed to certain high-frequency vibrations emitted by your vehicle's engine. These vibrations can damage the camera (the optical image stabilizer) of your phone.
Our sleeve absorbs up to 50% of engine and road vibrations.
To eliminate up to 90% of vibrations, we recommend using the Shapeheart anti-vibration mount. The anti-vibration mount is also recommended when using the metal plate under all circumstances.
ALL HANDLEBARS
Ready-to-install setup
ALL HANDLEBARS
Ready-to-install setup
1. Choose the adapter based on your handlebar diameter:
- 31.8 mm diameter handlebar: no adapter needed.
- 28.6 mm diameter handlebar: 1.7 mm adapter.
- 25.4 mm diameter handlebar: 3.5 mm adapter.
- 22.2 mm diameter handlebar: 5.1 mm adapter.
2. Position the adapter on the handlebar, then screw the mount on top of it using the Allen key.
3. Adjust the Booster 360 (or extension arm) to your preference by tightening the 3 orientation axis screws until the Booster can no longer move.
4. Insert your phone into the sleeve, snap it onto the mount (making sure to center it properly) and you're off!
Do you still have questions?
Does it really hold? Can the phone fall off?
Yes, it holds. You've seen it in the videos above, and if thousands of stores and well-known retailers across Europe (Intersport, Decathlon, Fnac, etc.) have trusted us for several years, there's a good reason for it.
So yes, if you hit a tree mountain biking or do backflips on a motocross bike, the mount could come off — but if you're like most riders, there will be no issue whatsoever.
To find out more, click here.
Are the magnets harmful to my phone?
No. Simply because there is no magnetic field in the sleeve or through the plate. We explain everything here.
Bear in mind that brands like Apple now even put magnets inside the phone itself.
I've heard that mounts can damage the phone's camera?
That's true, for motorcycles specifically — the engine vibrations of certain motorcycles can damage the optical image stabilizer of some phones (mainly iPhone).
Our mounts with sleeves absorb vibrations, so there's no risk.
We explain everything here.
Can my phone be stolen?
The question is legitimate, but it is absolutely not an issue we encounter.
For one thing, the mount is removable. Our mounts are very discreet, with no obvious distinguishing features. There is no more risk than when you walk down the street with your phone in your hand.
Snatch thefts most often occur on public transport. On the subway, for example, where once the doors close, there's nothing you can do.
Again, the question is legitimate, but we have not had a single report of this type of theft.
If your concern remains, you can install the Shapeheart Phone Lanyard.
Is the sleeve truly touch-responsive?
Yes, of course. And to ensure the touchscreen is as responsive as possible, it's important to choose the right sleeve size — please refer to our size guide.
Does the sleeve really protect against rain?
The Classic and Pro sleeves protect against rain but are not designed to be submerged in water — they are not waterproof. For that, you'll need the waterproof sleeve.
But under normal conditions, you can ride in the rain without any worries with our 3 sleeves.
Does the phone overheat?
Obviously, inside the sleeve the phone will run warmer than without one. It also depends on the phone, the GPS usage, whether you are charging the phone at the same time, and the outside temperature.
It's rare but it can happen. In that case, you should opt for the version with the metal plate.
Is there glare in the sun?
Yes, it can happen. Depending on the position of the sun, the angle of your phone, or your posture on your two-wheeler. You can use the metal plate to reduce this effect, but keep in mind that even without a sleeve, in direct sunlight, visibility can be reduced.
Also remember to set your brightness to the maximum.
Can I charge my phone?
Yes of course! The Classic and Pro sleeves have a slot to route the charging cable through.
What if I change my phone?
If you stay with an equivalent size, you don't need to buy anything. If not, you can simply purchase just the sleeve — no need to buy everything again.
Is there a warranty?
Yes, up to 10 years when you register your product. Everything is explained here.
Is it compatible with wireless charging and/or MagSafe?
The metal plate is not directly compatible with wireless charging. By sticking the metal plate onto your phone case, you simply need to remove the phone case to charge it on your MagSafe charger.
MagSafe alone will not be sufficient to withstand impacts. You must use the sleeve or the Shapeheart plate to ensure proper use of the mounts.
Which version should I choose?
Everything is explained: here.
Free delivery
from €49 and shipped within 24 to 48 hours
Secure payments
Visa, Mastercard, Paypal, Apple Pay
Here for you 7 days a week
Customer support 7/7 days: contact@shapeheart.com
Product warranty
10 years when you register your product!
